ColorLive CL-300 is a smaller size, lighter weight and can measure higher resolution with higher accuracy than previous series; CL-100 and CL-200.
ColorLive is excellent at color reproduction and can perform with low noise. It can measure low brightness emitting light sources and objects.
The correction factors suitable for different light sources are registered. So by changing suitable correction factors, it can also implement high level measurement accuracy.
ColorLive can judge "Pass"or "Fail"by setting an upper and lower limit of luminance and chromaticity in the area of measuring points.
Luminance (average, center, Max, Min, uniformity)
Chromaticity (xy - coordinate chromaticity, center, Max, Min)
All measured results are shown in 1 screen page by limiting measuring functions.
The connection between a computer and a camera is done by USB cable. It is space-saving because an external power supply is not needed.
You can set up the measuring points freely matching to the shape of measuring objects.
Set up measuring intervals and the number of measurements, then save the results of continuous measurement.
This function is convenient for checking luminance change over time.
You can output the measured results by CSV format file and can analyze them by Excel or other software.
Light source correction data for A light source, white LED light source, OLED light source and CCFL light source are registered at default.
For other types of light sources, you can set up correction factors by inputting the measured values with a standard luminance meter.
To avoid an erroneous motion and incorrect setting, password protection is also available.
Available in English, Chinese and Japanese
- Backlight
- Front light
- Flat light
- Digital signage
- OLED
| Model | ColorLive CL-300 | |
|---|---|---|
| Lens | Focus distance 12.5mm | |
| Camera | 235million-pixels (1936x1216 pixels)1/1.2"CMOS sensor | |
| Color depth | R/G/B each 4096level (12 bit each) | |
| Luminance measurement range
(*1) |
L type : 0.1 - 30,000 cd/m2 | |
| H type : 5 - 800,000 cd/m2 | ||
| Luminance linearity
(*1) |
±3% | |
| Chromaticity accuracy
(*1) |
±0.005 | |
| Repeat characteristic
(*1 *2) |
Luminance | ±0.5% |
| Chromaticity | ±0.003 | |
| Uniformity
(*1 *3) |
Luminance | ±2% |
| Chromaticity | ±0.003 | |
*1 Calibration based on white point of standard light source D65 at R/G/B backlight
*2 10 times continuous measurement
*3 81 points in 90% of digital image
| CPU | Intel Core i3 2.0GHz以上 |
|---|---|
| Memory | 2GB (At least free space 300MB physical memory is required when program is running) |
| HDD | Need free space more than 500MB |
| OS | Windows7 32bit/64bit Windows8 32bit/64bit Windows10 32bit/64bit |
| USB | Support USB3.0 and 2.0 (recommend 3.0 port if available)
Recommend connection to USB controller Intel chipset integrated |
| Monitor | XGA (1024x768) or better resolution
Recommended SXGA (1280 x 1024) or better resolution with bigger than 17"display |
| Operating temperature range | 0 - 35℃ (20 - 80% RH non condensing) |
- Camera unit
- USB cable 3m
- USB memory key (installation software & manual)
- Carrying case
